1-773- 701 - 9185

Care & maintenance after flooring installation

Just after you finished sanding, staining, buffing and coating your floor don't put rugs down for up to 30 days.

If using the glue down or floating installation methods, do not allow foot traffic or heavy furniture on the floor for 24 hours after installation is complete..

Once the flooring is installed it should be protected to avoid any damage that could be caused by tradespeople.

Cleaning Hardwood Floors

Each floor has its own manufacturer cleaning recommendations

These are printed or inside each box. They re actually quite useful and you should go by them as much as possible.

Keep your floors looking beautiful for years

Screening and top coating is a method of renewing the finish on a wood floor without actually removing the old finish and sanding down the wood. It will repair most signs of wear and create a uniform, sealed surface on the floor. It is relatively quick and inexpensive and can be repeated indefinitely.

Our Flooring harmonizes with the environment

To clean a factory urethane finish, simple water (applied with a slightly damp mop, never a wet mop) is effective at removing most scuffs, dried spills, and dust film, but for a more thorough cleaning look for a non-toxic cleaner formulated specifically for hardwood floors such as Bona-X Floor Cleaner. Floor waxes, oil soaps and petroleum-based cleaners should not be used under any circumstances.

Furniture

Felt padding should be permanently attached to the legs of all furniture before it is moved into the space.

ADR Floooring  © 2011  |